This excellent compact heat gun can be used for rubber stamp, embossed powder, heating shrinkable film, heat shrink tubings and drying paint, etc.
Size: 228*44mm / 9*1.7in, wire length: 100cm
Type: Constant temperature
Working temperature: 200°C/390°F
Rated power: 300W
Power type: AC power supply
Working Time: 10 minutes
1.Power on the heat air tool.
2.Hold the product as shown on the picture.do not touch the hot nozzle.
3.Keep a distance of 3-5cm from the vent,heating at an angle of about 45 degrees until the completion of the work.
4.Suggest do not continuously use more than 10 minutes to prevent overheated.
1*Hot Air Gun
1*Additional replaceable protecting cap