Oxygen Hydrogen Water Welder Flame Generator Polisher Polishing Machine 150-160L (AC-220±20V, Double Guns)

//Usually the product should take about 6–13 business days to arrive your hand after your payment is confirmed

Oxyhydrogen flame generator (water electrolyzed oxygen & hydrogen flame generator) is a hydrogen energy hi-tech product.
Specifications:
Total Volume: 4000ml. Flame Strength: Continuously for 1 big nozzle = 0.8 mm fire nozzle, or 2 C = 0.5 mm, 1 B = 0.4 mm + 1 D = 0.6 mm, 3 B = 0.4 mm, 4 A = 0.3 mm.
Oxyhydrogen Gas Made About 150-160L/hour
Electrolytic Cell Double cell body, 3 +3 layers.
Special stainless still.
Application:
• Fuse the lead or tin alloy plate for storage battery.
• Cut and fuse quartz or fine parts etc.
• Peel off FPC of computer, fuse LED chip and thermocouple.
• Below 8MM glass tube sealing.
Digital Ammeter If indicating 100-120A, machine is working well to make oxhydrogen gas.
Pressure Auto-control Pressure high than 0.15mpa switch off; low than 0.09mpa switch on.
Gas Barometer Low than 0.15mpa is right and safe; Oil inside for shockproof.
Torch & Nozzles 2 torch with red copper nozzle A, B, C, D & pinhole.
Electrolyte (alkali)
Must to add electrolyte at the first time of use. 500g electrolyte-powder mixed 2500ml water in a ovenproof plastic container. Change electrolyte when dirty or losing efficacy.
2 offlets in the bottom for changing.

Attention:
we will send the product to you as soon as possible
If you have any questions , please feel free to contact us

Leave a Reply

Your email address will not be published. Required fields are marked *

%d bloggers like this: