2017 Everlast mig140 MIG welder 110/120 volts FLUX 140AMP – –
The economy line of inverter MIG welders from Everlast is not short on performance or capability. The all new Power i-MIG 140E is a 120V powerhouse. The IGBT inverter design puts out a higher amp output with a better duty cycle when compared to transformer based MIG welders. Compare the Power i-MIG 140E to the competition. The competition features a transformer 140 amp MIG welder which typically has a 20% duty cycle at 90 amps, and a far less duty cycle at a maximum amps which is almost never published. The new Everlast Power i-MIG 140E comes with a 35% duty cycle at maximum 140 Amps of power. And it can do it while operating more efficiently, at a lower amp draw. To complete the comparison, it is also lighter in weight and offers a smaller foot print without reducing the maximum diameter wire roll size (8"). Its size and weight allows you to pick up the unit and carry it right to where you need it without needing a follow up visit to your chiropractor. INCLUDES: 10 Ft. (3m) 15 Series MIG gun Work clamp Ar/CO2 Regulator Consumable start kit Minimum/Maximum: Up to maximum of 3/16" single pass steel/stainless/aluminum Up to maximum of 3/8" multiple pass steel/stainless/aluminum Minimum of 24 gauge cabability Use a spool gun to weld Aluminum.
2017 Everlast PowerMTS 251Si Pulse MIG TIG Stick 250amp 110v/220v Multi Process Welder – –
The compact PowerMTS 251Si is one of the fourth generation of digitally controlled multi-process inverter welders from Everlast. Taking our customer's feedback into consideration from previous models, the all new PowerMTS 251SI is designed to be as versatile as ever with not only standard DC MIG, TIG and Stick welding capability but also with Synergic MIG, Pulse MIG, and Pulse TIG welding modes. This new welder is a leader in the compact multi-process welder class as both pulse MIG and pulse TIG features are not available from any other manufacturer. Additionally, the PowerMTS 251Si offers one more distinctive feature: it allows to the operator to choose from a touchless, high frequency start or a lift start in TIG mode. The stick mode offers more adjustability than ever with the addition of hot start intensity and hot start duration controls. If you are worried that these features may complicate the operation of the welder, then don't. The unit was designed with ease of operation in mind. There are no complicated menus to navigate, no touch screens to press and no complicated hidden features which are difficult to access. All controls, including burn back are now located on the panel face right where you can get to them and are grouped according to function, with an easy to understand format. All connections are right on the front of the panel. This includes the connection for the TIG torch which includes the gas connection with a gas solenoid control over pre and post flow. Compare that to the competition where you have to make the TIG connection through the side panels or through special non-standard connections with only a manually operated gas valve on the torch for scratch start or lift start, and you can see how far ahead the PowerMTS 251Si really is. Well, it makes sense when you consider Everlast was one of the first to offer a compact fully featured inverter MTS unit in the North American market.
2017 EVERLAST PowerARC 200ST 200amp TIG Stick IGBT Welder 110/220 Dual Voltage – –
The all new PowerARC 200ST is built with the true professional in mind. With 200 amps of DC Stick/Lift TIG welding power, the compact IGBT inverter welder cuts no corners on performance or design. The unit features E6010 welding capability via a dedicated connection port on the front panel of the welder for use on pipelines, shipyards, construction sites, portable repair jobs and pressure and container vessels, and any place requiring the use of E6010 and related cellulose-based welding rods. For excellent low spatter arc performance on E7018, E7024, E7014 and even stainless class electrodes the unit features another connector port for all other welding rods. In both the 6010 and standard operating modes, the unit feature auto adaptive Hot Start, and auto regulated arc force control, which gives you the a. Although this unit is built for pros who demand the most from their welder, the PowerARC 200ST feels at home, on the farm, or in the hobbiest's garage and features 120V/240V dual voltage operation. Be sure to pick up a gas valve TIG torch and gas regulator if you want to TIG weld with this unit. Check out our 17V series TIG torch and gas regulator located in our accessories section which are ideal for this unit if you need to use the TIG function. Minimum/Maximum: Stick: Minimum 1/16" electrode (120/240V) Maximum 5/32" -3/16" electrode (240V) Maximum 1/8" electrode (120V) (Max electrode size will depend upon type and brand) TIG: Minimum .025" Steel/Stainless (No aluminum)[120/240V] Maximum Single Pass: 1/4" Steel/Stainless (No aluminum) [240V] Maximum Multi-Pass: 3/8" Steel/Stainless (No aluminum) INCLUDES Stick electrode holder with 10 ft cable and 35 series DINSE- style connector Work Clamp with cable Consumable Starter Kit (Tungsten not included) 35 Series Female DINSE Connector
2017 PowerMIG275S 275 amp Synergic MIG STICK WELDER EVERLAST DIGITAL – –
Digitally Controlled IGBT Inverter MIG/Stick function (inc. E6010) Spool Gun ready Spot Stitch Timer Standard or Synergic MIG modes 275A MIG/200A Stick maximum output 50% Duty Cycle at 275A MIG/200A Stick .023"-.045" standard wire capability Adjustable inductance/arc force Volt, Amp and Memory displays Use 8" or 12" spools Euro-Quick Connect for the 36 series MIG gun INCLUDES: 12 ft. (4m) 36 series MIG gun with Euro quick-connect Workclamp with cable Stick Electrode Holder Ar/CO2 Regulator Spare Contact Tip Drive Rolls .023"-.045" Minimum/Maximum: MIG: Weld up to a maximum of 5/8" in a single pass weld Weld over 1" in multiple pass welds Weld a minimum of 24 gauge Stick: Weld with a Minimum of 1/16" Electrode Weld with a Maximum of 5/32" Electrode Maximum electrode diameter is ultimately determined by electrode type and manufacturer recommendations. Use a spool gun to weld aluminum.
2017 PowerMIG275P 275 amp PULSE Synergic MIG STICK WELDER EVERLAST DIGITAL – –
Digitally Controlled IGBT Inverter MIG/Stick function (inc. E6010) Standard, Synergic, or Pulse modes Spot/Stitch Timer Spool Gun and Push-Pull Ready 275A MIG/200A Stick maximum output 50% Duty Cycle at 275A MIG/200A Stick .023"-.045" standard wire capability Adjustable inductance/arc force Volt, Amp and Memory displays Use 8" or 12" spools Euro-Quick Connect for the 36 series MIG gun 12 ft. (4m) 36 series MIG gun with Euro quick-connect Workclamp with cable Stick Electrode Holder Ar/CO2 Regulator Spare Contact Tip Spare drive rolls from .023" to .045" hard wire MINIMUM MAXIMUM: Weld up to a maximum of 5/8" in a single pass weld Weld over 1" in multiple pass welds Weld a minimum of 24 gauge
2017 Everlast POWERARC 300ST SMAW/GTAW IGBT Inverter 220V – –
Need pure stick welding power and need lots of it in a small package? Need a DC TIG welder for those projects that require portability and power? No problem. The all new PowerARC 300 ST from Everlast can fill the need with 300 amps of DC Stick and TIG welding power. Pick a welding rod, and it can handle it, up to 1/4" in diameter. Welding with the DC lift TIG function, you can easily weld material up to and over 1/2" thick. It even has a special port dedicated to welding with E6010 rod class and handles 5P, 5P+ and 5P++ welding rods perfectly. This IGBT inverter stick and TIG welder also comes equipped with adjustable hot start intensity and adjustable arc force control when welding in Stick mode. In the TIG mode, you can easily start the arc with the lift TIG feature. The stick hot start and arc force control adjustments allow you to tailor the arc to perform just as you need it, and work better out of position when close arc gaps are required. If you are a pipeliner, or in a fab shop this unit will give you everything you need to weld steel and stainless. When comparing machines, keep in mind that the PowerARC 300ST is suitable for industrial performance and use with a duty cycle of 60% and 1 and 3 phase 240V capability. (480V 3 phase available as special built to order. Contact Everlast for details.) Whats Included: Electrode holder with 10 ft cable and 35 series DINSE-style connector Work clamp with 10 ft cable and 35 series DINSE-style connector Minimum/Maximum: Stick*: Minimum 1/16" electrode Maximum 1/4" electrode *Min/Max electrode size may vary upon electrode type and manufacturer design TIG: Minimum .025" steel/stainless (no aluminum) Maximum single pass 1/4" practical limit steel/stainless (no aluminum) Maximum multi-pass 5/8" practical limit steel/stainless ( no aluminum)
2017 Everlast PowerTIG 255 EXT Digital Ac Dc Tig Stick Pulse Welder Dual Voltage Inverter-based Ac Dc – –
If you are looking to take your shop or business to the next level in TIG welding capability, the digital inverter-based PowerTIG 255EXT delivers exceptional power and performance at a budget friendly price. In fact, the PowerTIG 255EXT not only has a long list of competitive features but also unique features that distinguishes it from the competition. You'll find surprisingly comptetive performance when comparing feature to feature against the competition such as memory, pulse and wave forms thanks to the digital microprocessor. Two "Easy Start Up" modes also add to the units versatility while keeping operation simple. The unit also excels as a stick welder featuring hot start time, hot start intensity and arc force control adjustments, making it a perfect welder for E6010 or E7018 welding. Everything on the AC/DC pulse TIG welder has been carefully designed for maximum life and repairibility down the road with componentized design and IGBT module components from name brand manufacturers , making diagnosis and repair, a simple, easy process. Several new features have been recently released. The spot weld timer feature allows the operator to make perfect, consistent spot welds when tacking up or welding sheet metal. The unit also has a more convenient way to purge gas and set gas without initiating arc flow with a dedicated purge button. Most importantly the PowerTIG 255EXT operates on 120V or 240V. Maximum output during 120V operation is 150 Amps for TIG, and 120 Amps for stick.
2017 EVERLAST PowerARC 160STH 160amp HF TIG Stick IGBT Welder 110/220 Dual Voltage – –
Features & Benefits Stable, smooth DC arc Low Power Consumption Professional capability with 35% duty cycle Portable with over the shoulder carrying strap Easy Hot Start for reduced electrode sticking Auto-Regulated Arc force control Standard HF and Lift Start TIG feature Digital Display for precise current setting DINSE style connectors for easy connection Impact resistant Carry case with TIG kit included as part of the standard package Foot pedal capability offers simple control over the full amp range, from 10-160 Dual Voltage 120/240 Adjustable Post Flow control for TIG
2017 EVERLAST PowerArc 140ST 140amp LIFT START TIG / STICK WELDER IGBT Dual Voltage – –
If you are looking for maximum flexibility and performance in a small utility class welder package, look no further than the PowerARC 140ST from Everlast. This tiny IGBT inverter welder features both Stick and DC Lift TIG capability. It comes with its own carry case and includes the Stick torch with the cable and DINSE style connector, gas valve TIG torch with cable and DINSE connector and the work clamp. The welding arc stability isn't sacrificed with this small unit. The arc quality is on the level of much larger, commercial class machines. The welder features both auto adaptive Hot start and auto adaptive arc force control in Stick mode and improves welability in with hard to start welding electrodes and in situations where rod sticking can be a problem. One of the best features the PowerARC 140ST has to offer is the 120V/240V dual-voltage capability, which allows the unit to go and weld virtually anywhere there is a clean power source available. Remember: The regulator is optional, so be sure to buy one of our gas regulators if you plan to use it for TIG. Minimum/Maximum: Stick Weld with a maximum of 1/8" diameter electrode (Maximum electrode diameter depends upon type and brand) Weld with a minimum of 1/16" diameter electrode TIG*: 20 gauge 1/8" (Single Pass) 3/8" (Multi-pass, practical limit) *Not for welding Aluminum or Magnesium Includes Standard Equipment: Stick electrode holder with 10 foot cable and 25 series DINSE-style connector Work clamp with 10 ft cable and 25 series DINSE-style connector 12 ft. Everlast 17V series TIG torch with 25 series DINSE-style connector Impact resistant carry case Consumable Starter Kit (Tungsten not included)
2015 Everlast PowerTig 255EXT DIGITAL AC DC TIG STICK Pulse welder 220 Volt Inverter-Based AC DC – –
True digital microprocessor control by Infineon Infineon IGBT Power Modules increase reliability and performance True low amp operation down to 3 amps DC and 5 amp AC 2T/4T/ Pedal operation modes with additional 2T/4T mode for torch amptrol operation. Wave form control in AC provides 4 wave forms: Sine, Triangular, Soft Square and Advanced Square Wave Gapless, Solid-State High Frequency design reduces maintenance issues and improves start reliability No hidden menus to access or complicated set up routines Simplified menu design allows settings to be quickly selected and adjusted Easy Start Up feature in AC or DC modes to make setup quick and easy for the beginner, or the advanced user Pulse up to 500Hz in DC, 250 Hz AC 10Hz Advanced AC Pulse mode improves penetration on thicker metals, and can reduce warping and burn through on thinner metals Arc force control, Hot start time, Hot start intensity settings for Stick welding to improve performance VRD function to help reduce chance of shock or electrocution in areas where a VRD is required or needed for stick welding Built in 240V receptacle for PowerCool 300 water cooler Full time fan for maximum duty cycle operation